Metal-free universal paste for the most demanding applications. With a partially synthetic base oil, sophisticated additive technology and state-of-the-art solid lubricants from the area of high-tech ceramics.
- resistant to certain organic acids and alkalis
- prevents stick slip
- good water resistance
- prevents seizing and cold welding
- does not attack common sealing materials
- prevents brake noise
- highest load-carrying capacity
Base: synthetic/mineral oil
Thickener: inorganic thickening
agents and white solid lubricants
Density: 1,42 g/cm³
Operating temperature range: -as a separating paste
Unworked penetration: ca. 340
Base oil viscosity 40°C: ca.100 mm²/s
Four-ball tester material load/weld force: 3800/4000 N - DIN 51 350,4
Friction numbers – thread: 0,10 - DIN 946
Pressfit test (no stick slip): 0,08 - LFW-4
SRV (cylinder/plate; 450 N, 1,000 µm, 50 Hz, 2 h) - friction number: 0,10-0,13 µm Reibungszahl / coefficient of friction
Areas of application
For lubrication of all kinds of high-load sliding surfaces. Especially for low slide speeds and oscillating movements. Also for screw, plug-in and bayonet connectors made from steel and non-ferrous metals. For separation of components subject to heat stress, such as combustion engines, turbines and motor vehicle brake systems. As corrosion protection for bolts, pins,studs, flanges, spindles and seatings in refineries, steel and cement works as well as shipping and agricultural engineering.
Before treating, parts must be clean and free from residues, dirt and moisture. Apply to cleaned surfaces using a paint brush, brush or lint-free cloth. Amount depends on area of use and application.