For special use in manual and differential transmissions. Significantly reduces wear and reduces excessive temperatures: quieter running, smoother shifting and easier running in. The transmission heats up less and benefits from smoother tooth faces in terms of quieter running and improved performance.
- resistant to stresses and vibrations
- increases operational reliability
- assures optimum shifting performance
- friction and wear reducing
- outstanding emergency-running properties
- reduces transmission noise
- secures optimum transmission operation
Solids content: ca. 10 %
Viscosity at 20 °C: 380 mPas - DIN 51398
Flash point: >200 °C - DIN ISO 2592
Pour point: -15 °C - DIN ISO 3016
Operating temperature range: > 400 °C
Density at 20 °C: 1 g/ml
Areas of application
Added to motor vehicle manual transmissions, axle drives, differential transmissions and mechanical steering systems. Not suitable for fully automatic transmissions and couplings that run in an oil bath.
Gear Oil Additive is added to the gear oil – mixing takes place automatically during operation. The product is suitable for both mineral and synthetic gear oils. 20 g Gear Oil Additive is sufficient for 1 liter of gear oil. 50 g Gear Oil Additive is sufficient for 2.5 liters of gear oil.
Not suitable for use with wet clutches!