Motorbike Radiator Cleaner is a concentrate for cleaning coolant circuits. Deposits in the cooling/heating system create blockages for heat exchange and also block thermostat valves and control mechanisms. When engine temperatures are too high, the engine runs uneconomically and suffers excessive wear at considerable risk of damage. Motorbike Radiator Cleaner removes deposits containing oil and limescale, and ensures that the engine runs reliably and at the optimum temperature. Does not contain aggressive acids or alkalis.
- disperses sludge
- removes oil and grease-based contaminants
- compatible with antifreezes
- chemical conversion of lime
- neutralizes acids
- neutral behavior in contact with rubber and plastics
Color: light yellow
Hazard class as per German VbF: none
pH value: ~8,7
Solubility in water: soluble
Density at 20 °C: 1,029 g/cm³
Areas of application
Suitable for all coolant circuits. Compatible with all conventional coolant additives and antifreezes.
LIQUI MOLY recommends adding Motorbike Radiator Cleaner to the cooling water if problems arise or before changing the coolant. Depending on the level of contamination, run the engine at operating temperature for 10-30 minutes. Drain the cleaner and flush out the cooling system with water. Fill the cooling system according to the manufacturer's instructions. Contents of can are sufficient to treat 5 liters of coolant.
The treated product contains biocidal products as
preservative. Contains Mixture of: 5-chloro-2-methyl-
2H-isothiazol-3-one [EC No 247-500-7] and 2-methyl-
2H-isothiazol-3-one [EC No 220-239-6] (3:1).