Properties - highly economical - gentle cleaning - suitable for diesel particulate filters - tested for turbochargers and catalytic converters - simple to use - no pollution to the environment - does not attack common sealing materials - rapid cleaning
Technical data Color / appearance: gelb, braun / yellow, brown Base: Additiv, Trägerflüssigkeit / additive, carrier liquid Density at 20 °C: 0,81 g/cm³ - DIN 51 757 Flash point: 63 °C - DIN ISO 2592 Pour point: -45 °C - DIN ISO 3016 Form: flüssig / liquid Viscosity at 40 °C: <7 mm²/s Odor: charakteristisch / characteristic
Areas of application Cleaning and flushing out the oil systems of gasoline and diesel engines. Improves hydraulic function e.g. VVT, VANOS and other oil actuated switches and valves.
Application One 500 ml can is sufficient for up to 5 litres of oil. Add Pro-Line Engine Flush to the engine oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. Pro Line Engine Flush is compatible with all commercially available engine oils Note: Not suitable for use on motorbikes with wet clutches.
