Scratch Stop is a grinding paste that does not contain silicone oil and is suitable for universal use. The product can be used to remove scratches, spray mist, stress marks and uneven finishes on colour or metallic paintwork. It is also suitable for matt and blank plastic discs or polycarbonate headlamp lenses, and can be used in both manual and automated processing.
- prepares surfaces for painting
- easy removal of weathered paint layers
- suitable for polycarbonate
- simple to use
Flash point: > 100 °C
Density at 20 °C: ~ 1,05 g/ml
pH value: 7,8
Color according to specification
Base Abrasives, wax
Viscosity at 20 °C: 10000-15000 mPas
Shelf life in original sealed container: 30 months
Areas of application
Specially developed product for removing scratches. Suitable for colour and metallic paintwork. Optimally suited for processing matt and blank plastic discs or polycarbonate headlamp lenses.
Wash the vehicle thoroughly before application. Shake the tube before use. Apply the product with a cloth or sponge and work it into the affected area under light pressure (polish with a foam buffing machine at 1,500 to 2,000 rpm). Exercise caution during application on chassis joints, as the product is extremely abrasive. Wipe off any polish residue using a clean cloth (preferably a microfibre cloth). After the procedure is completed, seal the paintwork surface using Universal Polish (part no. 1679).