Description
High performance automatic transmission fluid of the new generation based on synthetic technology. It was developed specifically for use in CVTs with thrust link belt or a gear chain made of steel. The basis of modern base oils and select additives offer the best possible anti-froth protection, which is necessary for CVTs. It also features a very good stability against aging and oxidation. Top Tec ATF 1400 is tried and tested, most notably in the Mercedes-Benz A-Class and B-Class Autotronic transmissions and in continuously variable automatic transmissions (Multitronic) in Audi vehicles.
Properties
- outstanding friction characteristics
- very good low-temperature properties
- excellent wear resistance
- prevents foam formation
- outstanding resistance to oxidation
- excellent corrosion protection
- excellent viscosity/temperature properties
- extremely stable to aging
LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required:
Dodge CVTF+4 ∙ Dodge NS-2 ∙ Ford CVT23 ∙ Ford CVT30 ∙ Ford Mercon C ∙ GM/Saturn DEX-CVT ∙ Honda HCF2 ∙ Honda HMMF ∙ Hyundai SP-CVT 1 ∙ Jeep CVTF+4 ∙ Jeep NS-2 ∙ Kia SP-CVT 1 ∙ MB 236.20 ∙ Mini Cooper (EZL 799) ∙ Mitsubishi CVTF-J1 ∙ Mitsubishi CVTF-J4 ∙ Nissan CVT NS-2 Fluid ∙ Nissan NS-3 CVT Fluid ∙ Subaru E-CVT ∙ Subaru High Torque CVTF ∙ Subaru Lineartronic CV-30 ∙ Subaru Lineartronic CVTF ∙ Subaru Lineartronic CVTF II ∙ Subaru NS-2 ∙ Suzuki CVT Green1 ∙ Suzuki CVT Green2 ∙ Suzuki NS-2 ∙ Suzuki TC ∙ Toyota CVTF FE ∙ Toyota TC ∙ VW G 052 180 ∙ VW G 052 516
Technical data
Density at 15 °C: 0,855 g/cm³ - DIN 51757
Viscosity at 40 °C: 32,0 mm²/s - ASTM D 7042-04
Viscosity at 100 °C: 7,1 mm²/s - ASTM D 7042-04
Viscosity at -40°C (Brookfield): <= 20000 mPas - ASTM D 2983-09
Viscosity index: 194 - DIN ISO 2909
Flash point: 200 °C - DIN ISO 2592
Pour point: -45 °C - DIN ISO 3016
Color number (ASTM): L 2,0 - DIN ISO 2049
Areas of application
For the new generation of CVTs with thrust link belt or a gear chain made of steel.
Application
The specifications and instructions from the unit or vehicle manufacturer must be followed. Optimum effectiveness is only possible when the product is used unmixed